INSTRUCTIONS FOR USB UPGRADE
Step 1. Software
Download the software from the link below and save file under root on USB drive (no folder)
http://www.freedrive.com/file/1214445,se_2010pvr_100219_210510.abs
Step 2. Connection
Connect primary signal W7/W4 on top and secondary bottom
Note: that primary signal is which ever satellite you choose
in this tutorial the example is based on W7/W4
Step 3. Scan Channels
Goto Satellite Menu
Select 36.0 E Eutelsat W4
Press OK
Save & Exit
Goto Antenna Setup
Make Sure LNB is set to UNIVERSAL
and LNB power is ON
Add TP with following setting
Frequency 11747
Symbol Rate 27500
Polarity Horizontal
FEC 3/4
Select newly added TP
The Signal strength and Quality should as a blue and green bar at bottom of your screen
Search Channels with Network Search option ON
Step 4.
Goto upgrade by USB menu
plug USB drive at the back for STB
and upgrade with new file
Step 5.
Goto language menu
press 2520
press red button
press 2520 again
Select SAT as Emulation
Step 6.
Select Channel 1
Step 7.
Remove plug for reboot of STB
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment