THESAT SA/SE 2010 PVR SW UPDATE

There has been an software update for THESAT SE 2010 PVR

Please use the proper software according to the model you have

http://www.freedrive.com/file/1215881,dp_sa_2010pvr_100527.abs
http://www.freedrive.com/file/1215882,dp_se_2010pvr_100527.abs

Instructions
1. Download the software to root of pen drive (no folder)
2. Update software of the set top box
3. Perform a factory reset
4. Set Emulation to SAT
5. Scan Channels
6. Select Channel 1 
7. Reboot via power cord


The detailed step by step instructions can be found 

KEYFLASH: INSTRUCTIONS THESAT SE 2010 PVR

INSTRUCTIONS THESAT SE 2010 PVR

INSTRUCTIONS FOR USB UPGRADE

Step 1. Software
Download the software from the link below and save file under root on USB drive (no folder)
http://www.freedrive.com/file/1214445,se_2010pvr_100219_210510.abs

Step 2. Connection
Connect primary signal W7/W4 on top and secondary bottom

Note: that primary signal is which ever satellite you choose
in this tutorial the example is based on W7/W4

Step 3. Scan Channels

Goto Satellite Menu
Select 36.0 E Eutelsat W4
Press OK
Save & Exit

Goto Antenna Setup
Make Sure LNB is set to UNIVERSAL
and LNB power is ON

Add TP with following setting
Frequency           11747
Symbol Rate        27500
Polarity Horizontal
FEC                    3/4

Select newly added TP
The Signal strength and Quality should as a blue and green bar at bottom of your screen
Search Channels with Network Search option ON

Step 4.
Goto upgrade by USB menu
plug USB drive at the back for STB
and upgrade with new file

Step 5.
Goto language menu
press 2520
press red button
press 2520 again
Select  SAT as Emulation

Step 6.
Select Channel 1

Step 7.
Remove plug for reboot of STB

WORKING TOOLS

Here is my first post! dadada!!!

I decided to start by creating a freedrive folder where all the tools and files required for your research will be located.

http://www.freedrive.com/folder/271307